Configuring the Address Parameter
To configure the Address parameter, use the ADDMX function to convert the character string, described below, to an
address:
ADDMX(‘rack.slot.channel{ip_address}message_type.protocol’), where:
Field |
Description |
Setting |
|---|---|---|
rack |
The number assigned to the rack containing the communication module. |
Application specific |
slot |
The position of the communication module in the rack. |
Application specific |
channel |
The communication channel. |
3 |
ip_address |
The IP address of the BMEAHI0812(H) or BMEAHO0412(C). |
Application specific |
message_type |
The type of message, presented as a three character string:
|
UNC |
protocol |
The protocol type. |
CIP |