Introduction

This function is accessible only in online mode, for analog modules placed in the main rack.

NOTE: The debug function is not available for analog I/O modules placed in remote drops.

For each input/output module of the project, it can be used to:

  • display measurements

  • display the parameters of each channel

  • access the diagnostics and adjustment of the selected channel

The function also gives access to the module diagnostics in the case of an event.

Procedure

The procedure to access the debug function is as follows.

Step

Action

1

configure the module

2

transfer the application to the PLC

3

change to online mode

4

in the rack configuration screen, double-click the module

5

select the Debug tab