Access the Page

Access the DNP3 Server Configuration web page through the SETUP tab for theBMENOR2200H module (SETUP > MENU > RTU PROTOCOL CONFIGURATION > DNP3 Server Configuration).

Parameters

Find these parameters and settings on the DNP3 Server Configuration web page:

Parameter

Description

Channel Name

This is the name of the selected channel.

TLS Enabled

Select (check) this box to enable TLS for all server channels.

Deselect (uncheck) this box to disable TLS for all server channels.

Secure Authentication Enabled

SAv2

SAv5

MAC Algorithm (HMAC)

Select the MAC algorithm to be applied in challenges.

Key/Account Table
This table lists these client/server options:

  • User Number

  • User Name

  • User Role (operator, viewer, single user)

  • Key Wrap: Select AES-128 or AES-256.

  • Key: Enter the key wrap algorithm (hexadecimal format).

  • Apply: Click this button to record your modifications.

Enable Aggressive Mode

Select (check) this box to enable aggressive mode.

Deselect (uncheck) this box to disable aggressive.

Advanced Settings
Click the Configure button to access these advanced parameters for the selected channel:

  • GERNERAL AUTHENTICATION PARAMETERS

  • SAV2/SAV5 PARAMETERS

NOTE: Click any information icon (i) to see a description of the corresponding parameter.

Submit

Click this button to apply the modifications to the selected channel.

Add Channel

Click this button to create a channel with this configuration.

Execute Changes

After you configure any of these parameters, press the Apply button in the page banner to implement your changes.
NOTE: The Apply and Discard buttons are disabled (grayed out) when the configuration is not valid.