Add the Module to the PLC Bus

Add a BMENOR2200H module to a Control Expert project and assign a name to it:

Step

Action

1

Open a project in Control Expert.

2

Expand (+) the Project Browser to see the PLC bus (Project > Configuration > PLC bus).

3

Double-click PLC bus to view the assembled rack(s).

4

Right-click an empty rack slot and scroll to select a New Device .

NOTE: Select a rack position that conforms to the module’s slot restrictions.

5

In the Part Number column in the New Device dialog box, expand Communication to see the available modules.

6

Double-click the BMENOR2200H module to open the Properties of device dialog box.

NOTE: There are several BMENOR2200H modules under the Device List. The later versions correspond to the newer features from the software version.

7

In the Name field, assign a name to the module (or accept the default name).

8

Confirm that the DTM for the module was automatically added to the project (Tools > DTM Browser).

NOTE: When you add a module to the local rack configuration, the corresponding communication DTM is automatically added to the list ( All Devices > Device types > Communication Devices).

9

Repeat these steps to add more BMENOR2200H modules to the PLC bus .

NOTE: The local rack in an M580 system can hold a maximum of four communication modules, including the BMENOR2200H modules.